Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY › from 2019.09
RM32H0E _58 Vehicle Interior _060065 SEAT BELT _0294234 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the driver side and front passenger side.

·

The procedure listed below is for the driver side.



PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.

Install the front seat belt anchor plate.


b.

for Manual Seat:

i.
B458414C01
1.375,3.052 1.604,2.781 true 1.188,3.073 1.396,3.281 0.208,0.208 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.



ii.

Engage the clamps.


iii.
B458462

Engage the claw and clamp.



c.

for Power Seat:

i.
B557312C01
1.281,2.865 1.458,2.615 true 1.125,2.896 1.333,3.104 0.208,0.208 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.



ii.

Engage the clamp.


iii.
B557309

Engage the claw and clamps.



Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.

Install the front seat belt anchor plate.


b.
B458416C01
2.125,2.896 1.948,2.729 true 2.188,2.875 2.396,3.073 0.208,0.198 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster assembly.


i.

Engage the clamp.



c.
B458463

Engage the claw and clamps.


d.

Connect the connector.


Hide 3.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

Hide 4.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)