Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING SYSTEM › from 2019.09
RM32H0E _53 Suspension _059606 TIRE PRESSURE MONITORING _0292310 TIRE PRESSURE WARNING SYSTEM D

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING SYSTEM  DTC CHECK / CLEAR  


CHECK DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER) (USING GTS)


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

Chassis > Tire Pressure Monitor > Trouble Codes
50001 203

f.

Read the DTCs.



CHECK DTC (for MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Trouble Codes
50001 123

f.

Read the DTCs.



CHECK DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER) (USING SST CHECK WIRE) (for 3ZR-FAE)


a.

Turn the ignition switch off.

C253862C02
2,0.781 2,0.271 2,0.271 2.188,0.271 true 2.167,1.292 2.167,1.688 2.167,1.688 2.396,1.688 true 0.708,0.208 1.385,0.51 0.677,0.302 10 false *1 2.24,0.177 2.781,0.417 0.542,0.24 10 false CG 2.438,1.594 3.073,1.885 0.635,0.292 10 false TC 4.698,0.365 5.01,0.646 0.313,0.281 10 false *2 0.698,2.052 1.521,2.365 0.823,0.313 10 false *a 1.01,2.604 1.802,2.969 0.792,0.365 10 false *b 1.01,2.99 1.823,3.302 0.813,0.313 10 false *c 1.49,2.313 2.229,2.646 0.74,0.333 10 false *d 1.802,3.313 2.448,3.604 0.646,0.292 10 false *d 3.51,2.042 4.063,2.417 0.552,0.375 10 false *e 4.625,3.323 5.188,3.698 0.563,0.375 10 false *f 4.833,2.063 5.219,2.385 0.385,0.323 10 false *h 3.979,2.302 4.24,2.573 0.26,0.271 10 false *f 4.438,2.26 5.219,2.542 0.781,0.281 10 false *g 5.344,2.313 6.115,2.833 0.771,0.521 10 false *i 5.958,3.177 6.49,3.542 0.531,0.365 10 false *j 4.042,3.313 4.427,3.635 0.385,0.323 10 false *h
*1 DLC3 *2 Tire Pressure Warning Light
*a Normal System Code *b ON
*c OFF *d 0.25 sec.
*e Code 13 and 33 *f 0.5 sec.
*g 2.5 sec. *h 1.5 sec.
*i 4.5 sec. *j Repeat



b.

Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

SST
09843-18040  


c.

Turn the ignition switch to ON.


d.

Read and record any DTCs indicated by the tire pressure warning light on the combination meter assembly. Refer to the illustration for examples of a normal system code and codes 13 and 33.

HINT:
·

If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.

Trouble Area Link
Tire pressure warning light circuit (Click here)
TC and CG terminal circuit (Click here)

·

If 2 or more malfunctions are indicated at the same time, the lowest numbered DTC is displayed first.




e.

Check the details of the DTCs.

Tire Pressure Warning Light Display Tester Display
11 C2111
12 C2112
13 C2113
14 C2114
15 C2115
21 C2121
22 C2122
23 C2123
24 C2124
25 C2125
26 C2126
41 C2141
42 C2142
43 C2143
44 C2144
45 C2145
71 C2171
76 C2176
77 C2177
79 C2179
81 C2181
82 C2182
83 C2183
84 C2184
85 C2185
98 C2198


f.

After completing the check, turn the ignition switch off and remove SST from the DLC3.



CLEAR DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER)


HINT:

After repairing the malfunctions, clear the DTCs.


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Chassis / Tire Pressure Monitor / Trouble Codes.

Chassis > Tire Pressure Monitor > Clear DTCs
50002 203

f.

Clear the DTCs following the prompts on the GTS screen.

HINT:

Refer to the GTS operator's manual for further details.




CLEAR DTC (for MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU))


HINT:

After repairing the malfunctions, clear the DTCs.


a.

Turn the ignition switch off.


b.

Connect the GTS to the DLC3.


c.

Turn the ignition switch to ON.


d.

Turn the GTS on.


e.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.

Body Electrical > Main Body > Clear DTCs
50002 123

f.

Clear the DTCs following the prompts on the GTS screen.

HINT:

Refer to the GTS operator's manual for further details.