2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2006

HINT:
When removing the outside moulding, heat the vehicle body and outside moulding using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Outside Moulding
20 to 30°C (68 to 86°F)


1. REMOVE FRONT DOOR OUTSIDE MOULDING

  1. B150807E01
    Put protective tape around the front door outside moulding.

  1. Insert a piano wire between the vehicle body and front door outside moulding.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the front door outside moulding to the vehicle body.

    B150808E01

    NOTICE:
    1. If reusing the front door outside moulding, take care not to damage the front door outside moulding.
    2. Be careful not to damage the vehicle body.

  1. Remove the front door outside moulding.


2. REMOVE REAR DOOR OUTSIDE MOULDING

  1. B149518E01
    Put protective tape around the rear door outside moulding.

  1. Insert a piano wire between the vehicle body and rear door outside moulding.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the rear door outside moulding to the vehicle body.

    B150809E01

    NOTICE:
    1. If reusing the rear door outside moulding, take care not to damage the rear door outside moulding.
    2. Be careful not to damage the vehicle body.

  1. Remove the rear door outside moulding.

← COMPONENTS (from Jun 2006)INSTALLATION (from Jun 2006) →