2006-2011 Camry Aurion · Service Manual BRAKE

REMOVAL

Removal / installation · Vehicles built from Jun 2009

HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The procedures listed below are for the LH side.


1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
If brake fluid leaks onto any painted surface, wash or remove it completely.


3. DISCONNECT REAR BRAKE FLEXIBLE HOSE

  1. C143454
    Remove the union bolt and 2 gaskets from the rear disc brake cylinder assembly, then disconnect the rear flexible hose.


4. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY

  1. C143453E01
    Hold the 2 rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.

← COMPONENTS (from Jun 2009)DISASSEMBLY (from Jun 2009) →