2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Display does not Dim when Light Control Switch is Turned ON

Circuit diagnosis · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK IMAGE QUALITY SETTING

  1. E137169E02
    Enter the display adjustment screen by pressing the "DISP" switch.

  1. Turn the light control switch to the tail position.

  1. Check if "Day Mode" on the display adjustment is on.

    OK:
    "Day Mode" is on.



NG
Go to step 2
OK

TURN "DAY MODE" SETTING OFF

2. CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE)

  1. E125810E01
    Enter the "Display Check" mode (Vehicle Signal Check) (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    Display
    Tail or head
    ON
    Off
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY


← Illumination for Panel Switch does not Come on with Tail Switch ON (from Jun 2009)Display does not Dim when Light Control Switch is Turned ON (Oct 2006 – May 2009) →