2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Display does not Dim when Light Control Switch is Turned ON

Circuit diagnosis · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING

  1. E190565E02
    Enter the display quality adjustment screen.

  1. Turn the light control switch to the tail position.

  1. Check if "Day Mode" on the display quality adjustment screen is on.

    OK:
    "Day Mode" is on.



NG
Go to step 2
OK

TURN "Day Mode" SETTING OFF

2. CHECK VEHICLE SIGNAL (OPERATION CHECK)

  1. E176538
    Enter the "Vehicle Signal Check Mode" screen (Check Vehicle Signal) (Click here).

  1. Check that the display changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch
    Display
    Tail or on
    ON
    Off
    OFF

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.

    Result:
    Result
    Proceed to
    NG
    A
    OK
    (for 2GR-FE RHD)
    B
    OK
    (except 2GR-FE RHD)
    C



B
REPLACE NAVIGATION RECEIVER ASSEMBLY (for 2GR-FE RHD) (Click here)

C
REPLACE NAVIGATION RECEIVER ASSEMBLY (except 2GR-FE RHD) (Click here)
A

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Display does not Dim when Light Control Switch is Turned ON (Oct 2006 – May 2009)Panel Switches do not Function (Jun 2006 – Sep 2006) →