2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Voice is not Recognized

Circuit diagnosis · Vehicles built Jun 2006 – Sep 2006

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009

INSPECTION PROCEDURE


1. CHECK NAVIGATION SETTING

  1. E120104E06
    Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Setup".

  1. E120105E02
    Check that "Voice Recognition Guidance" is not OFF.

    OK:
    Voice Recognition Guidance is not OFF.



NG
TURN VOICE RECOGNITION GUIDANCE "ON"
OK


2. CHECK MAP DISC

  1. I100152E12
    Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK


3. CHECK MAP DISC

  1. I100201E04
    Check for dirt on the map disc surface.

    OK:
    No dirt is on the map disc surface.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.

    HINT:
    If the map disc is dirty, clean the map disc by wiping the map disc surface radially with a soft cloth.



NG
CLEAN MAP DISC
OK


4. CHECK MICROPHONE (NAVIGATION CHECK MODE)

  1. E120056E03
    Enter the "MICROPHONE & VOICE RECOGNITION CHECK" mode (Click here).

  1. When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.

  1. Push the recording switch and perform voice recording.

    HINT:
    Voice can be recorded up to 5 seconds.

  1. Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

    OK:
    All check results are normal.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY


← Voice Recognition Difficulty (from Jun 2009)Voice is not Recognized (Oct 2006 – May 2009) →