2006-2011 Camry Aurion · Service Manual ENGINE

REASSEMBLY

Removal / installation · Vehicles built from Jun 2006


1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

  1. A096585E03
    Apply a light coat of gasoline to 2 new O-rings, and install them to the fuel pressure regulator.

  1. A136236E01
    Install the fuel pressure regulator to the fuel filter.


2. INSTALL FUEL PUMP

  1. A147096E01
    Apply gasoline to a new O-ring and install it to the fuel filter.

  1. A126130
    Connect the fuel pump harness connector.

  1. A136240
    Engage the 5 claws on the fuel filter and install the fuel pump with the pump filter.


3. CONNECT FUEL PUMP HARNESS

  1. A136231
    Connect the fuel pump harness connector to the fuel suction plate.


4. INSTALL FUEL NO. 1 SUCTION SUPPORT

  1. A136233
    Install the fuel No. 1 suction support to the fuel filter.


5. INSTALL FUEL NO. 1 TANK BAND BRACKET
  1. Install the spring to the fuel suction plate shaft and install it to the fuel No. 1 tank band bracket.

  1. Engage the 4 claws of the fuel No. 1 suction support and install the fuel No. 1 tank band bracket to the fuel suction plate with the fuel filter.

  1. A136234E01
    Install a new E-ring.


6. INSTALL FUEL SENDER GAUGE ASSEMBLY

  1. A136241
    Slide the fuel sender gauge to fit the claw.

  1. A136021
    Connect the fuel sender gauge connector.

← INSPECTION (from Jun 2006)INSTALLATION (Jun 2006 – May 2009) →