INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT FUEL PUMP |
Check the fuel pump resistance.

Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
- 0.2 to 3.0 Ω at 20°C (68°F)
Check fuel pump operation.
Apply battery voltage to terminals 1 and 2. Check that the pump operates.
- NOTICE:
- These tests must be completed within 10 seconds to prevent the coil from burning out.
- Keep the fuel pump as far away from the battery as possible.
- Always switch the voltage on and off on the battery side, not the fuel pump side.
- These tests must be completed within 10 seconds to prevent the coil from burning out.
