INSTALLATION
Removal / installation · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1. INSTALL FRONT SEAT ASSEMBLY |
Place the seat in the cabin.
Connect the connectors under the seat.
Connect the cable to the negative (-) battery terminal.
Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.
Temporarily install the front side of the front seat assembly with the 2 bolts.

Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
Temporarily install the rear side of the front seat assembly with the 2 bolts.

Move the front seat assembly to the rearmost position by operating the slide and vertical power seat switch knob.
Fully tighten the 2 bolts on the front side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.
- Torque:
- 37 N*m{ 377 kgf*cm , 27 ft.*lbf }
Move the front seat assembly fully forward by operating the slide and vertical power seat switch knob.
Fully tighten the 2 bolts on the rear side of the front seat assembly in the order of the inner side bolt and then the outer side bolt.
- Torque:
- 37 N*m{ 377 kgf*cm , 27 ft.*lbf }
| 2. INSTALL OUTER SEAT TRACK BRACKET COVER |
Engage the 4 claws and install the front seat rear outer track bracket cover.

| 3. INSTALL INNER SEAT TRACK BRACKET COVER |
Engage the 4 claws and install the front seat rear inner track bracket cover.
| 4. INSTALL FRONT SEAT HEADREST ASSEMBLY |
| 5. INSPECT SRS WARNING LIGHT |
| 6. INSPECT FRONT SEAT ASSEMBLY |
Inspect the power seat operation.
