Operate the power seat switch knob and move the seat to the position farthest forward.
Using a screwdriver, detach the 4 claws and remove the outer seat track bracket cover.
HINT:
Tape the screwdriver tip before use.
3.
REMOVE INNER SEAT TRACK BRACKET COVER
Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.
4.
REMOVE FRONT SEAT ASSEMBLY
Operate the power seat switch knob and move the seat to the rearmost position.
Remove the 2 bolts on the front seat track bracket.
Operate the power seat switch knob and move the seat to the position farthest forward.
Remove the 2 bolts on the rear seat track bracket.
Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).
Disconnect the connectors under the seat. Then remove the front seat assembly.