2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


1. REMOVE FRONT SEAT HEADREST ASSEMBLY

2. REMOVE OUTER SEAT TRACK BRACKET COVER
  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B149587
    Using a screwdriver, detach the 4 claws and remove the outer seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


3. REMOVE INNER SEAT TRACK BRACKET COVER

  1. B149588
    Using a screwdriver, detach the 4 claws and remove the inner seat track bracket cover.


4. REMOVE FRONT SEAT ASSEMBLY
  1. Operate the power seat switch knob and move the seat to the rearmost position.

  1. B149590
    Remove the 2 bolts on the front seat track bracket.

  1. Operate the power seat switch knob and move the seat to the position farthest forward.

  1. B139102
    Remove the 2 bolts on the rear seat track bracket.

  1. Disconnect the cable from the negative (-) battery terminal.

    CAUTION:
    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent the airbag and seat belt pretensioner from deploying (Click here).

  1. Disconnect the connectors under the seat. Then remove the front seat assembly.

← REMOVAL (Jun 2006 – Sep 2006)REMOVAL (from Jun 2009) →