2006-2011 Camry Aurion · Service Manual COMMUNICATION SYSTEM

FAIL-SAFE CHART

System information · Vehicles built Jun 2006 – Sep 2006


FAIL-SAFE FUNCTION
  1. When communication fails in any of the CAN bus wires (communication lines) due to a short circuit or other causes, a fail-safe function(s) will operate. The fail-safe function that is specified for each system operates to prevent those systems from malfunctioning.

  2. Relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)

    Function
    Control Master
    System Related
    Condition When Communication Impossible
    DTC Detection (Driver Detectable)
    ABS control (Controls driving force while ABS in operation)
    Skid Control ECU
    -
    Control is inoperative (ABS control gradually stops)
    U0073 (ABS warning light comes on)
    Air conditioning control
    Air Conditioning Amplifier
    1. ECM
    2. Combination Meter
    3. Main Body ECU
    Air conditioning function stops
    None (Air conditioning inoperative)
    Meter display (Displays operation condition and DTCs)
    Combination Meter
    1. ECM
    2. Skid Control ECU
    3. Center Airbag Sensor Assembly
    4. Main Body ECU
    Light does not come on, illuminates abnormally, or blinks abnormally
    U0100, U0129 (Abnormal display)
    Buzzer control
    Combination Meter
    1. ECM
    2. Center Airbag Sensor Assembly
    3. Main Body ECU
    Buzzer function stops
    U0100, U0129 (Buzzer does not sound)
    Illumination control
    Main Body ECU
    1. ECM
    2. Combination Meter
    Light illumination rheostat inoperative
    None (Rheostat inoperative)

← DIAGNOSIS SYSTEM (Jun 2006 – Sep 2006)Skid Control ECU Communication Stop Mode (Jun 2006 – Sep 2006) →