FAIL-SAFE CHART
System information · Vehicles built from Oct 2006
| FAIL-SAFE FUNCTION |
When communication fails in any of the CAN bus wires (communication wires) due to a short circuit or other causes, the fail-safe function, which is specified for each system, operates to prevent the system from malfunctioning.
The following chart shows the relationships between components, system functions, and effects of communication failure on these functions. (For further details, see the pages for each system.)
*1: with VSCFunction
Control Master
System Related
Condition When Communication Impossible
DTC Detection (Driver Detectable)
VSC control*1 (Controls driving force while VSC in operation)
Skid Control ECU
- ECM
- Steering Angle Sensor
- Yaw Rate Sensor
Control is inoperative (VSC control gradually stops)
U0073, U0100, U0123 U0124, U0126 (VSC warning light comes on)
ABS control (Controls driving force while ABS in operation)
Skid Control ECU
Yaw Rate Sensor*1
Control is inoperative (ABS control gradually stops)
U0073, U0124 (ABS warning light comes on)
Air conditioning control
Air Conditioning Amplifier
- ECM
- Combination Meter
- Main Body ECU
Air conditioning function stops
B1499 (Air conditioning inoperative)
Buzzer control
Combination Meter
- ECM
- Center Airbag Sensor Assembly
Buzzer function stops
U0100, U0129 (Buzzer does not sound)
Illumination control
Main Body ECU
- ECM
- Combination Meter
Light illumination rheostat inoperative
None (Rheostat inoperative)
Meter display
Combination Meter
- ECM
- Skid Control ECU
- Center Airbag Sensor Assembly
- Main Body ECU
Light does not come on, illuminates abnormally, or blinks abnormally
U0100, U0129 (Abnormal display)
Clearance sonar function *2(Informs driver when an obstacle is detected)
Clearance Warning ECU
- ECM
- Combination Meter
- Main Body ECU
Clearance sonar function stops
None
(Clearance sonar main switch indicator does not come on)
*2: with TOYOTA parking assist-sensor system- ECM