DATA LIST / ACTIVE TEST
System information · Vehicles built Jun 2006 – Sep 2006
Versions by build date: Jun 2006 – Sep 2006 from Oct 2006
- HINT:
- By accessing the DATA LIST displayed on the intelligent tester, you can perform such functions as reading the values of switches and sensors without removing any parts. Reading the DATA LIST as the first step in troubleshooting is one method to save diagnostic time.
| DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY |
Connect the intelligent tester to the DLC3.

Turn the ignition switch to the ON position.
Turn the tester on.
Enter the following menus: Body / SRS Airbag / Data List.
Check the values by referring to the table below.
DATA LIST: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Seat
Driver Seat Position/
FORWARD: Seat position is forward
BKWARD: Seat position is backward
FAIL: Failure detected
FORWARD/BKWARD
-
D Bk SW
Driver Buckle SW/
UNSET: The seat belt is not fastened
SET: The seat belt is fastened
NG: Data is not determined
UNSET/SET
-
Disp Typ
Display Type Information/
LR: The display is indicated by LH/RH
DP: The display is indicated by Driver/Passenger
DP
-
#Past Codes
Number of Past DTC/
Min.: 0, Max.: 255
0
-