ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2006
| INSPECT LUGGAGE COMPARTMENT DOOR PANEL SUB-ASSEMBLY |
Check that the clearance measurements of areas A to F are within each standard range.


- Standard clearance:
Area
Measurement
Area
Measurement
A
7.6 mm (0.299 in.)
D
3.8 to 7.8 mm (0.150 to 0.307 in.)
B
2.0 to 5.0 mm (0.079 to 0.197 in.)
E
2.0 to 5.0 mm (0.079 to 0.197 in.)
C
-1.5 to 1.5 mm (-0.059 to 0.059 in.)
F
-1.5 to 1.5 mm (-0.059 to 0.059 in.)
