2006-2011 Camry Aurion · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Oct 2006


COOLING FAN RELAY

  1. A035654
    Remove the relay from engine room relay block No. 1.

  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)

    If the result is not as specified, replace the cooling fan relay.

  1. Install the relay to engine room relay block No. 1.

← ON-VEHICLE INSPECTION (from Oct 2006)COMPONENTS (from Oct 2006) →