ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2006
| INSPECT ROOF CONSOLE BOX ASSEMBLY |
Remove the roof console box assembly.

Measure the resistance according to the value(s) in the table below.
- Standard resistance:
Tester Connection
Switch Position
Specified Condition
Q6-1 (CLS) - Q6-3 (GND)
CLOSE
Below 100 Ω
Q6-2 (OPN) - Q6-3 (GND)
OPEN
Below 100 Ω
Q6-4 (DOWN) - Q6-3 (GND)
DOWN
Below 100 Ω
Q6-5 (UP) - Q6-3 (GND)
UP
Below 100 Ω
Q6-1 (CLS) - Q6-3 (GND)
OPEN
1 kΩ or higher
Q6-2 (OPN) - Q6-3 (GND)
CLOSE
1 kΩ or higher
Q6-4 (DOWN) - Q6-3 (GND)
UP
1 kΩ or higher
Q6-5 (UP) - Q6-3 (GND)
DOWN
1 kΩ or higher
