ON-VEHICLE INSPECTION
Inspection · Vehicles built from Oct 2006
| CHECK POWER SOURCE MODE CHANGE FUNCTION |
Check the function of the engine switch.
Check that power source mode changes in accordance with the conditions of the shift position and brake pedal.
Brake Pedal
Shift Lever
Power Source Mode Pattern
Depressed
P or N Position
When the engine switch is pushed once. - off → engine start
- on (ACC) → engine start
- on (IG) → engine start
Not depressed
P position
Each time the engine switch is pushed. - off → on (ACC) → on (IG) → off
Except P Position
Each time the engine switch is pushed. - off → on (ACC) → on (IG) → on (ACC)
-
P Position
When the engine switch is pushed with power source mode on (IG) (engine running). - on (IG) → off
-
Except P Position
When the engine switch is pushed with power source mode on (IG) (engine running). - on (IG) → on (ACC)
- off → engine start
Check if power source mode changes without pressing the engine switch.
With power source mode on (ACC) and the shift position in P, wait for at least 1 hour. Check that power source mode changes from on (ACC) to off automatically.
| CHECK INDICATOR CONDITION |
![]() ![]() |
Check the indicator on the engine switch.
Check that the engine switch indicator turns on and changes color according to the table below.
Power Source Mode/Condition
Indicator Light Condition
Brake pedal released
Brake pedal depressed, shift lever in P or N
off
OFF
ON (Green) (When key and vehicle IDs match)
on (ACC, IG)
ON (Amber)
ON (Green)
Engine running
OFF
OFF
Steering lock not unlocked
Flashes (Green) for 15 sec.
Flashes (Green) for 15 sec.
System malfunction
Flashes (Amber) for 15 sec.
Flashes (Amber) for 15 sec.


