2006-2011 Camry Aurion · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2006


INSPECT TRANSMISSION CONTROL SWITCH

  1. G028380E11
    Measure the resistance according to the value(s) in the table below when the shift lever is moved to each position.

    Standard resistance:
    Shift Position
    Tester Connection
    Specified Condition
    4 and 3
    1 - 2
    Below 1 Ω
    Except 4 and 3
    10 kΩ or higher
    L
    5 - 6
    Below 1 Ω
    Except L
    10 kΩ or higher

    If the resistance value is not as specified, replace the transmission control switch.

← DISASSEMBLY (from Jun 2006)ADJUSTMENT (from Jun 2006) →