2006-2011 Camry Aurion · Service Manual SECURITIES

B2785 Communication Malfunction between ECUs Connected by LIN

Diagnostic trouble codes · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

DESCRIPTION

This DTC is output when LIN communication from the certification ECU stops for a certain amount of time.

HINT:
If this DTC B2785 is detected simultaneously with DTC B2786, B2789 or B2287, troubleshoot DTC B2786, B2789 or B2287 first.
DTC No.
B2785
B2786
B2789
B2287
Trouble Area
DTC Output
○
○
-
-
Wire harness
(Certification ECU - Steering lock ECU)
○
-
○
-
Wire harness
(Certification ECU - ID code box)
○
-
-
○
Wire harness
(Certification - Main body ECU (Instrument panel J/B))
○: DTC is output
-: DTC is not output

DTC No.
DTC Detection Condition
Trouble Area
B2785
  1. LIN communication from certification ECU stops for a certain amount of time
  2. Open or short in wire harness between ECUs
  1. Wire harness
  2. Certification ECU
  3. Main body ECU (Instrument panel J/B)
  4. Steering lock ECU
  5. ID code box

WIRING DIAGRAM

B128332E05

INSPECTION PROCEDURE

NOTICE:
  1. If the certification ECU or ID code box is replaced, register the key and ECU communication ID.
  2. If the steering lock ECU or main body ECU (instrument panel J/B) is replaced, register the ECU code and ECU communication ID.


1. CHECK DTC OUTPUT
  1. Delete the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result:
    Result
    Proceed to
    B2785 output recurs
    A
    B2785 output does not recur
    B



B
USE SIMULATION METHOD TO CHECK
A


2. REPLACE CERTIFICATION ECU
  1. Replace the certification ECU.


NEXT


3. ELECTRICAL KEY REGISTRATION
  1. Register the electrical key code in the certification ECU.


NEXT


4. ECU COMMUNICATION ID REGISTRATION
  1. Register the ECU communication ID between the ID code box and ECM.


NEXT


5. CHECK DTC OUTPUT
  1. Delete the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result:
    Result
    Proceed to
    B2785 output recurs
    A
    B2785 output does not recur
    B



B
END
A


6. REPLACE MAIN BODY ECU (INSTRUMENT PANEL J/B)
  1. Replace the main body ECU (instrument panel J/B).


NEXT


7. ECU CODE REGISTRATION
  1. Register the ECU code between the ECUs connected by LIN communication.


NEXT


8. CHECK DTC OUTPUT
  1. Delete the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result:
    Result
    Proceed to
    B2785 output recurs
    A
    B2785 output does not recur
    B



B
END
A


9. REPLACE STEERING LOCK ECU
  1. Replace the steering lock ECU.


NEXT


10. ECU CODE REGISTRATION
  1. Register the ECU code between the ECUs connected by LIN communication.


NEXT


11. CHECK DTC OUTPUT
  1. Delete the DTCs (Click here).

  1. Recheck for DTCs (Click here).

    Result:
    Result
    Proceed to
    B2785 output recurs
    A
    B2785 output does not recur
    B



B
END
A

REPLACE ID CODE BOX


← B2785 Communication Malfunction between ECUs Connected by LIN (Oct 2006 – May 2009)B2786 No Response from Steering Lock ECU (Oct 2006 – May 2009) →