B2450 Initialization has not been Performed
Diagnostic trouble codes · Vehicles built from Jun 2009
DESCRIPTION
The AFS ECU stores this DTC if initialization has not been performed after the ECU was replaced.| DTC No. |
DTC Detection Condition |
Trouble Area |
| B2450 |
Initialization of the AFS ECU has not been performed |
AFS ECU |
INSPECTION PROCEDURE
| 1. PERFORM INITIALIZATION |
Perform initialization of the AFS ECU (Click here).
| NEXT | |
| 2. RECHECK FOR DTC |
Using the intelligent tester, recheck for DTCs.
- Result:
Result
Proceed to
DTC B2450 is not output.
A
DTC B2450 is output.
B
- HINT:
- If the AFS ECU stores DTC B2450 even though the ECU has been initialized, there may be a malfunction in the AFS ECU.
|
|
||||
| A | ||
| ||
