2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


COMBINATION METER ASSEMBLY (for 2AZ-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E134489E01
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
B (F1-1) - Body ground
V - Body ground
Battery
Always
10 to 14 V
B2 (F1-2) - Body ground
R - Body ground
Battery
Always
10 to 14 V
B (F1-3) - Body ground
G - Body ground
Turn indicator light signal
Turn the ignition switch to the ON position, turn signal RH indicator light OFF
Below 1 V
Turn the ignition switch to the ON position, turn signal RH indicator light is blinking
10 to 14 V
B (F1-4) - Body ground
B - Body ground
Turn indicator light signal
Turn the ignition switch to the ON position, turn signal LH indicator light OFF
Below 1 V
Turn the ignition switch to the ON position, turn signal LH indicator light is blinking
10 to 14 V
CHG- (F1-6) - Body ground
Y - Body ground
Charge warning light signal
Turn the ignition switch to the ON position, CHARGE warning light OFF
10 to 14 V
Turn the ignition switch to the ON position, CHARGE warning light ON
Below 1 V
S (F1-7) - Body ground
O - Body ground
Engine oil pressure warning light signal
Turn the ignition switch to the ON position, engine oil pressure warning light OFF
10 to 14 V
Turn the ignition switch to the ON position, engine oil pressure warning light ON
Below 1 V
CHK (F1-9) - Body ground
R - Body ground
Check engine warning light signal
Turn the ignition switch to the ON position, CHECK ENGINE warning light ON
Below 3 V
Turn the ignition switch to the ON position, CHECK ENGINE warning light OFF
10 to 14 V
SI (F1-10) - Body ground
W - Body ground
Speed signal for other systems (Input)
Turn the wheel slowly
Pulse generation
(See waveform 1)
+S (F1-11) - Body ground
V - Body ground
Speed signal for other systems (Output)
Turn the ignition switch to the ON position, turn the wheel slowly
Pulse generation
(See waveform 1)
E2 (F1-12) - Body ground
W-B - Body ground
Ground (Power ground)
Always
Below 1 V
IG+ (F1-13) - Body ground
GR - Body ground
Ignition switch signal
Turn the ignition switch off
Below 1 V
Turn the ignition switch to the ON position
10 to 14 V
B/LE (F1-15) - Body ground
LG - Body ground
Brake fluid level warning light signal
Turn the ignition switch to the ON position, BRAKE warning light OFF
10 to 14 V
Turn the ignition switch to the ON position, BRAKE warning light ON
Below 1 V
P/SB (F1-16) (*1) - Body ground
G - Body ground
Passenger seat belt warning light signal
Sit on the front passenger seat, turn the ignition switch to the ON position, front passenger seat belt warning light OFF
10 to 14 V
Sit on the front passenger seat, turn the ignition switch to the ON position, front passenger seat belt warning light is blinking
10 to 14 V ←→ Below 1 V
DISP (F1-17) (*2) - Body ground
V - Body ground
Steering pad switch signal
Turn the ignition switch to the ON position, DISP switch off
4 to 6 V
Turn the ignition switch to the ON position, DISP switch ON
Below 1 V
PBKL (*1) (F1-19) - Body ground
BR - Body ground
Front passenger seat buckle switch signal
Turn the ignition switch to the ON position, front passenger seat belt is unfastened
Below 1 V
Turn the ignition switch to the ON position, front passenger seat belt is fastened
10 to 14 V
FR (F1-20) - Body ground
GR - Body ground
Fuel signal
Turn the ignition switch to the ON position, fuel level is FULL
Below 1 V
Turn the ignition switch to the ON position, fuel level is EMPTY
3 to 7 V
FE (F1-21) - Body ground
P - Body ground
Ground (Fuel ground)
Always
Below 1 V
CANL (F1-22) - Body ground
W - Body ground
CAN communication signal
-
-
CANH (F1-23) - Body ground
B - Body ground
CAN communication signal
-
-
ES (F1-24) - Body ground
BR - Body ground
Ground (Signal ground)
Always
Below 1 V

  1. I043789E01
    Waveform 1 (Reference): Using an oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)


COMBINATION METER INNER CIRCUIT (for 2AZ-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E134506E06
E134507E02
E134508E02
Terminal No.
Wire harness side
F1
1
MPX-B Fuse (B)
2
DOME Fuse (B2)
3
Turn Signal Flasher (B)
4
Turn Signal Flasher (B)
5
-
6
Generator (CHG-)
7
Oil Pressure Warning Switch (S)
8
-
9
ECM (CHK)
10
Skid Control ECU (SI)
11
Each Part That Uses Speed Signal (+S)
12
Ground (E2)
13
No. 2 GAUGE Fuse (IG+)
14
-
15
Brake Fluid Level Warning Switch (B/LE)
16
Clock Assembly (P/SB) (*1)
17
Steering Pad Switch (DISP) (*2)
18
-
19
Front Passenger Seat Buckle Switch Signal (PBKL) (*1)
20
Fuel Sender Gauge Assembly (FR)
21
Fuel Sender Gauge Assembly (FE)
22
CAN Communication Line (CANL)
23
CAN Communication Line (CANH)
24
Ground (ES)

COMBINATION METER ASSEMBLY (for 2GR-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E123358E02
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
B (F1-1) - Body ground
V - Body ground
Battery
Always
10 to 14 V
B2 (F1-2) - Body ground
R - Body ground
Battery
Always
10 to 14 V
S (F1-8) - Body ground
O - Body ground
Engine oil pressure warning light signal
Turn the ignition switch on (IG), engine oil pressure warning light OFF
10 to 14 V
Turn the ignition switch on (IG), engine oil pressure warning light ON
Below 1 V
P/SB (F1-9) (*1) - Body ground
P - Body ground
Passenger seat belt warning light signal
Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light OFF
10 to 14 V
Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light is blinking
10 to 14 V ←→ Below 1 V
IG+ (F1-13) - Body ground
GR - Body ground
Ignition switch signal
Turn the ignition switch off
Below 1 V
Turn the ignition switch on (IG)
10 to 14 V
CANH (F1-17) - Body ground
B - Body ground
CAN communication signal
-
-
CANL (F1-18) - Body ground
W - Body ground
CAN communication signal
-
-
DISP (F1-22) (*2) - Body ground
V - Body ground
Steering pad switch signal
Turn the ignition switch on (IG), DISP switch off
4 to 6 V
Turn the ignition switch on (IG), DISP switch ON
Below 1 V
CHG- (F1-23) - Body ground
L - Body ground
Charge warning light signal
Turn the ignition switch on (IG), CHARGE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), CHARGE warning light ON
Below 1 V
ES (F1-24) - Body ground
BR - Body ground
Ground (Signal ground)
Always
Below 1 V
B (F2-1) - Body ground
G - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal RH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal RH indicator light ON
10 to 14 V
B (F2-2) - Body ground
L - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal LH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal LH indicator light ON
10 to 14 V
CHK (F2-4) - Body ground
R - Body ground
Check engine warning light signal
Turn the ignition switch on (IG), CHECK ENGINE warning light ON
Below 3 V
Turn the ignition switch on (IG), CHECK ENGINE warning light OFF
10 to 14 V
LVWG (F2-5) - Body ground
L - Body ground
Headlight beam level control indicator light signal
Turn the ignition switch on (IG), LEVELING indicator light OFF
10 to 14 V
Turn the ignition switch on (IG), LEVELING indicator light ON
Below 2 V
B/LE (F2-6) - Body ground
LG - Body ground
Brake fluid level warning light signal
Turn the ignition switch on (IG), BRAKE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), BRAKE warning light ON
Below 1 V
PBKL (F2-8) (*1) - Body ground
BR - Body ground
Front passenger seat buckle switch signal
Turn the ignition switch on (IG), front passenger seat belt is unfastened
Below 1 V
Turn the ignition switch on (IG), front passenger seat belt is fastened
10 to 14 V
+S (F2-12) - Body ground
V - Body ground
Speed signal for other systems (Output)
Turn the wheel slowly
Pulse generation
(See waveform 1)
SI (F2-14) - Body ground
W - Body ground
Speed signal for other systems (Input)
Turn the ignition switch on (IG), turn the wheel slowly
Pulse generation
(See waveform 1)
FR (F2-15) - Body ground
GR - Body ground
Fuel signal
Turn the ignition switch on (IG), fuel level is FULL
Below 1 V
Turn the ignition switch on (IG), fuel level is EMPTY
3 to 7 V
FE (F2-16) - Body ground
P - Body ground
Ground (Fuel ground)
Always
Below 1 V

  1. I043789E01
    Waveform 1 (Reference): Using oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms/DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)


COMBINATION METER INNER CIRCUIT (for 2GR-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E143773E01
E143774E01
E143775E01
Terminal No.
Wire harness side
F1
1
MPX-B Fuse (B)
2
DOME Fuse (B2)
3
-
4
-
5
-
6
-
7
-
8
Oil Pressure Warning Switch (S)
9
Clock Assembly (P/SB) (*1)
10
-
11
-
12
Ground (E2)
13
No. 2 GAUGE Fuse (IG+)
14
-
15
-
16
-
17
CAN Communication Line (CANH)
18
CAN Communication Line (CANL)
19
-
20
-
21
-
22
Steering Pad Switch (DISP) (*2)
23
Alternator L Terminal (CHG-)
24
Ground (ES)
F2
1
Turn Signal Flasher (B)
2
Turn Signal Flasher (B)
3
-
4
ECM (CHK)
5
Headlight Beam Level Control ECU (LVWG)
6
Brake Fluid Level Warning Switch (B/LE)
7
-
8
Front Seat Inner Belt Assembly (Passenger Seat) (PBKL) (*1)
9
-
10
-
11
-
12
Each part that uses speed signal (+S)
13
-
14
Skid Control ECU (SI)
15
Fuel Sender Gauge Assembly (FR)
16
Fuel Sender Gauge Assembly (FE)
← TERMINALS OF ECU (Jun 2006 – Sep 2006)TERMINALS OF ECU (from Jun 2009) →