2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


COMBINATION METER ASSEMBLY (for 2AZ-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E134489E01
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
B (F1-1) - Body ground
V - Body ground
Battery
Always
10 to 14 V
B2 (F1-2) - Body ground
R - Body ground
Battery
Always
10 to 14 V
B (F1-3) - Body ground
G - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal RH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal RH indicator light is blinking
10 to 14 V
B (F1-4) - Body ground
B - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal LH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal LH indicator light is blinking
10 to 14 V
CHG- (F1-6) - Body ground
Y - Body ground
Charge warning light signal
Turn the ignition switch on (IG), CHARGE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), CHARGE warning light ON
Below 1 V
S (F1-7) - Body ground
BE - Body ground
Engine oil pressure warning light signal
Turn the ignition switch on (IG), engine oil pressure warning light OFF
10 to 14 V
Turn the ignition switch on (IG), engine oil pressure warning light ON
Below 1 V
CHK (F1-9) - Body ground
R - Body ground
Check engine warning light signal
Turn the ignition switch on (IG), CHECK ENGINE warning light ON
Below 3 V
Turn the ignition switch on (IG), CHECK ENGINE warning light OFF
10 to 14 V
SI (F1-10) - Body ground
W - Body ground
Speed signal for other systems (Input)
Turn the wheel slowly
Pulse generation
(See waveform 1)
+S (F1-11) - Body ground
V - Body ground
Speed signal for other systems (Output)
Turn the ignition switch on (IG), turn the wheel slowly
Pulse generation
(See waveform 1)
E2 (F1-12) - Body ground
W-B - Body ground
Ground (Power ground)
Always
Below 1 V
IG+ (F1-13) - Body ground
GR - Body ground
Ignition switch signal
Turn the ignition switch off
Below 1 V
Turn the ignition switch on (IG)
10 to 14 V
B/LE (F1-15) - Body ground
LG - Body ground
Brake fluid level warning light signal
Turn the ignition switch on (IG), BRAKE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), BRAKE warning light ON
Below 1 V
P/SB (F1-16) (*1) - Body ground
G - Body ground
Passenger seat belt warning light signal
Sit on the front passenger seat, Turn the ignition switch on (IG), front passenger seat belt warning light OFF
10 to 14 V
Sit on the front passenger seat, Turn the ignition switch on (IG), front passenger seat belt warning light is blinking
10 to 14 V ←→ Below 1 V
DISP (F1-17) (*2) - Body ground
V - Body ground
Steering pad switch signal
Turn the ignition switch on (IG), DISP switch off
4 to 6 V
Turn the ignition switch on (IG), DISP switch ON
Below 1 V
PBKL (*1) (F1-19) - Body ground
BR - Body ground
Front passenger seat buckle switch signal
Turn the ignition switch on (IG), front passenger seat belt is unfastened
Below 1 V
Turn the ignition switch on (IG), front passenger seat belt is fastened
10 to 14 V
FR (F1-20) - Body ground
GR - Body ground
Fuel signal
Turn the ignition switch on (IG), fuel level is FULL
Below 1 V
Turn the ignition switch on (IG), fuel level is EMPTY
3 to 7 V
FE (F1-21) - Body ground
P - Body ground
Ground (Fuel ground)
Always
Below 1 V
CANL (F1-22) - Body ground
W - Body ground
CAN communication signal
-
-
CANH (F1-23) - Body ground
B - Body ground
CAN communication signal
-
-
ES (F1-24) - Body ground
BR - Body ground
Ground (Signal ground)
Always
Below 1 V

  1. I043789E01
    Waveform 1 (Reference): Using an oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms./DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)


COMBINATION METER INNER CIRCUIT (for 2AZ-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E134506E06
E134507E02
E134508E02
Terminal No.
Wire harness side
F1
1
MPX-B Fuse (B)
2
DOME Fuse (B2)
3
Turn Signal Flasher (B)
4
Turn Signal Flasher (B)
5
-
6
Generator (CHG-)
7
Oil Pressure Warning Switch (S)
8
-
9
ECM (CHK)
10
Skid Control ECU (SI)
11
Each Part That Uses Speed Signal (+S)
12
Ground (E2)
13
No. 2 GAUGE Fuse (IG+)
14
-
15
Brake Fluid Level Warning Switch (B/LE)
16
Clock Assembly (P/SB) (*1)
17
Steering Pad Switch (DISP) (*2)
18
-
19
Front Passenger Seat Buckle Switch Signal (PBKL) (*1)
20
Fuel Sender Gauge Assembly (FR)
21
Fuel Sender Gauge Assembly (FE)
22
CAN Communication Line (CANL)
23
CAN Communication Line (CANH)
24
Ground (ES)

COMBINATION METER ASSEMBLY (for 2GR-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E123358E02
Symbols (Terminal No.)
Wiring Color
Terminal Description
Condition
Specified Condition
B (F1-1) - Body ground
V - Body ground
Battery
Always
10 to 14 V
B2 (F1-2) - Body ground
R - Body ground
Battery
Always
10 to 14 V
S (F1-8) - Body ground
BE - Body ground
Engine oil pressure warning light signal
Turn the ignition switch on (IG), engine oil pressure warning light OFF
10 to 14 V
Turn the ignition switch on (IG), engine oil pressure warning light ON
Below 1 V
P/SB (F1-9) (*1) - Body ground
P - Body ground
Passenger seat belt warning light signal
Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light OFF
10 to 14 V
Sit on the front passenger seat, turn the ignition switch on (IG), front passenger seat belt warning light is blinking
10 to 14 V ←→ Below 1 V
IG+ (F1-13) - Body ground
GR - Body ground
Ignition switch signal
Turn the ignition switch off
Below 1 V
Turn the ignition switch on (IG)
10 to 14 V
CANH (F1-17) - Body ground
B - Body ground
CAN communication signal
-
-
CANL (F1-18) - Body ground
W - Body ground
CAN communication signal
-
-
DISP (F1-22) (*2) - Body ground
V - Body ground
Steering pad switch signal
Turn the ignition switch on (IG), DISP switch off
4 to 6 V
Turn the ignition switch on (IG), DISP switch ON
Below 1 V
CHG- (F1-23) - Body ground
L - Body ground
Charge warning light signal
Turn the ignition switch on (IG), CHARGE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), CHARGE warning light ON
Below 1 V
ES (F1-24) - Body ground
BR - Body ground
Ground (Signal ground)
Always
Below 1 V
B (F2-1) - Body ground
G - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal RH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal RH indicator light ON
10 to 14 V
B (F2-2) - Body ground
L - Body ground
Turn indicator light signal
Turn the ignition switch on (IG), turn signal LH indicator light OFF
Below 1 V
Turn the ignition switch on (IG), turn signal LH indicator light ON
10 to 14 V
CHK (F2-4) - Body ground
R - Body ground
Check engine warning light signal
Turn the ignition switch on (IG), CHECK ENGINE warning light ON
Below 3 V
Turn the ignition switch on (IG), CHECK ENGINE warning light OFF
10 to 14 V
LVWG (F2-5) - Body ground
L - Body ground
Headlight beam level control indicator light signal
Turn the ignition switch on (IG), LEVELING indicator light OFF
10 to 14 V
Turn the ignition switch on (IG), LEVELING indicator light ON
Below 2 V
B/LE (F2-6) - Body ground
LG - Body ground
Brake fluid level warning light signal
Turn the ignition switch on (IG), BRAKE warning light OFF
10 to 14 V
Turn the ignition switch on (IG), BRAKE warning light ON
Below 1 V
PBKL (F2-8) (*1) - Body ground
BR - Body ground
Front passenger seat buckle switch signal
Turn the ignition switch on (IG), front passenger seat belt is unfastened
Below 1 V
Turn the ignition switch on (IG), front passenger seat belt is fastened
10 to 14 V
+S (F2-12) - Body ground
V - Body ground
Speed signal for other systems (Output)
Turn the wheel slowly
Pulse generation
(See waveform 1)
SI (F2-14) - Body ground
W - Body ground
Speed signal for other systems (Input)
Turn the ignition switch on (IG), turn the wheel slowly
Pulse generation
(See waveform 1)
FR (F2-15) - Body ground
GR - Body ground
Fuel signal
Turn the ignition switch on (IG), fuel level is FULL
Below 1 V
Turn the ignition switch on (IG), fuel level is EMPTY
3 to 7 V
FE (F2-16) - Body ground
P - Body ground
Ground (Fuel ground)
Always
Below 1 V

  1. I043789E01
    Waveform 1 (Reference): Using oscilloscope:
    Item
    Condition
    Tool setting
    5 V/DIV., 20 ms/DIV.
    Vehicle condition
    Driving at approx. 20 km/h (12 mph)


COMBINATION METER INNER CIRCUIT (for 2GR-FE)
*1: for G.C.C. Countries
*2: with Multi-information Display
E143773E01
E143774E01
E143775E01
Terminal No.
Wire harness side
F1
1
MPX-B Fuse (B)
2
DOME Fuse (B2)
3
-
4
-
5
-
6
-
7
-
8
Oil Pressure Warning Switch (S)
9
Clock Assembly (P/SB) (*1)
10
-
11
-
12
Ground (E2)
13
No. 2 GAUGE Fuse (IG+)
14
-
15
-
16
-
17
CAN Communication Line (CANH)
18
CAN Communication Line (CANL)
19
-
20
-
21
-
22
Steering Pad Switch (DISP) (*2)
23
Alternator L Terminal (CHG-)
24
Ground (ES)
F2
1
Turn Signal Flasher (B)
2
Turn Signal Flasher (B)
3
-
4
ECM (CHK)
5
Headlight Beam Level Control ECU (LVWG)
6
Brake Fluid Level Warning Switch (B/LE)
7
-
8
Front Seat Inner Belt Assembly (Passenger Seat) (PBKL) (*1)
9
-
10
-
11
-
12
Each part that uses speed signal (+S)
13
-
14
Skid Control ECU (SI)
15
Fuel Sender Gauge Assembly (FR)
16
Fuel Sender Gauge Assembly (FE)
← TERMINALS OF ECU (Oct 2006 – May 2009)DIAGNOSIS SYSTEM (Jun 2006 – Sep 2006) →