The Other Caller's Voice cannot be Heard, is too Quiet, or Distorted
Circuit diagnosis · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
INSPECTION PROCEDURE
| 1. CHECK CELLULAR PHONE |
 |
Check if the voice on the other side can be heard using a cellular phone.
- OK:
- Voice can be heard.
|
NG |
 |
|
| REPAIR OR REPLACE CELLULAR PHONE |
|
|
| OK |
|
 |
|
| 2. CHECK NAVIGATION SYSTEM |
 |
Check that navigation sound can be heard from the front speaker.
- OK:
- Navigation sound can be heard.
|
NG |
 |
|
| GO TO "VOICE GUIDANCE DOES NOT FUNCTION" IN PROBLEM SYMPTOMS TABLE (Click here)
|
|
|
| OK |
|
 |
|
| 3. CHECK SETTINGS |
 |
Enter the "Call" screen.
- Check if the volume level is not set to low.
- OK:
- The level is not set to low.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| 4. CHECK SETTINGS (OPERATION CHECK) |
 |
- Enter the "Hands-free Volume Setting" screen (Check Hands-free Volume Setting) (Click here).
Check if the "Receive Voice Level" is set to "0".
- HINT:
- The "Receive Voice Level" can be set to 11 different levels, -5 to +5, with a 3 dB difference.
Check if the "Receive Voice Level" is set to the minimum or maximum level.
- HINT:
- When the "Receive Voice Level" is set to the minimum or maximum level, the sound may be distorted.
- OK:
- The "Receive Voice Level" is set to "0".
|
NG |
 |
|
| SET RECEIVE VOICE LEVEL TO "0" |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|