2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. E132666E08
    Remove the fuel sender gauge assembly.

  1. Check that the float moves smoothly between F and E.

  1. Measure the resistance between terminals 2 (FE) and 3 (FR) of the connector according to the value(s) in the table below.

    Standard resistance:
    Float Level
    Resistance (Ω)
    F
    13.5 to 16.5
    Between E and F
    13.5 to 414.5 (Gradually changes)
    E
    405.5 to 414.5

    HINT:
    If the value is not as specified, replace the fuel sender gauge assembly.

← REMOVAL (from Jun 2009)INSTALLATION (from Oct 2006) →