2006-2011 Camry Aurion · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE

HINT:
Click here


2. SECURE ENGINE
  1. Secure the engine onto an engine stand with the bolts.


3. REMOVE NO. 1 ENGINE MOUNTING BRACKET FRONT LH

  1. A129646
    Remove the 6 bolts and No. 1 engine mounting bracket front LH.


4. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

  1. A129645E01
    Remove the 2 bolts, 2 idler pulley cover plates and 2 idler pulley sub-assemblies.


5. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

  1. A135522
    Remove the 5 bolts and V-ribbed belt tensioner assembly.


6. REMOVE WATER PUMP PULLEY

  1. A128112E03
    Using SST, hold the water pump pulley.
    SST
    09960-10010   (09962-01000, 09963-00700)

  1. Remove the 4 bolts and water pump pulley.


7. REMOVE WATER INLET HOUSING

  1. A133375E01
    Disconnect the water hose.

  1. Remove the 2 bolts, nut and water inlet housing.

  1. A128120
    Remove the water inlet housing gasket and water outlet pipe O-ring.


8. REMOVE WATER PUMP ASSEMBLY

  1. A094889
    Remove the 16 bolts, water pump assembly and water pump gasket.

← COMPONENTS (from Oct 2006)REMOVAL (from Jun 2009) →