FAIL-SAFE CHART
System information · Vehicles built Oct 2006 – May 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| FAIL SAFE OPERATION |
If there is a problem with sensor signals or actuator systems, the skid control ECU prohibits power supply to the brake actuator assembly and informs the ECM of the VSC system failure.
The brake actuator assembly turns off each solenoid and the ECM shuts off the VSC control (traction control signal) from the skid control ECU accordingly, which turns out to be as if the vehicle stability control system was not installed.
ABS, VSC, and TRC control will be prohibited, but EBD control continues as much as possible. If EBD control is impossible, the brake warning light comes on to warn the driver (Click here).
Malfunction
Symptom
ABS system
Prohibits the ABS, BA, TRC, and VSC control
BA system
Prohibits the ABS, BA, TRC, and VSC control
EBD system
Prohibits the ABS, EBD, BA, TRC, and VSC control
TRC system
Prohibits the TRC and VSC control
VSC system
Prohibits the TRC and VSC control
- HINT:
- A malfunction in either the ABS or BA system results in an identical operation, with ABS, BA, TRC, and VSC system control prohibited.
- If control is prohibited due to a malfunction during operation, control will be disabled gradually to prevent the vehicle from becoming unstable suddenly.
- A malfunction in either the ABS or BA system results in an identical operation, with ABS, BA, TRC, and VSC system control prohibited.