2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag from deploying (Click here).


2. REMOVE FRONT SEAT HEADREST ASSEMBLY

3. REMOVE OUTER SEAT TRACK BRACKET COVER
  1. Move the front seat assembly fully forward by operating the slide handle.

  1. B148935
    Using a screwdriver, disengage the 4 claws and remove the outer seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


4. REMOVE INNER SEAT TRACK BRACKET COVER

  1. B148936
    Using a screwdriver, disengage the 4 claws and remove the inner seat track bracket cover.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE FRONT SEAT ASSEMBLY
  1. Move the front seat assembly to the rearmost position by operating the slide handle.

  1. B148945
    Remove the 2 bolts on the front seat track bracket.

  1. Move the front seat assembly fully forward by operating the slide handle.

  1. B148937
    Remove the 2 bolts on the rear seat track bracket.

  1. Move the front seat assembly to the center position and adjust the seatback to the vertical position by operating the slide and reclining adjuster release handle.

  1. Disconnect the connectors and clamp.

  1. Remove the front seat assembly.

← REMOVAL (Oct 2006 – May 2009)DISASSEMBLY (Oct 2006 – May 2009) →