2006-2011 Camry Aurion · Service Manual BODY

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009

NOTICE:
Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.


1. REMOVE RECLINING ADJUSTER RELEASE HANDLE

  1. B148938
    Lift the reclining adjuster release handle.

  1. Using a screwdriver, disengage the claw and remove the reclining adjuster release handle.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE FRONT SEAT CUSHION SHIELD

  1. B165295
    Disengage the 2 hooks.

  1. B148931
    Remove the 2 screws.

  1. Disengage the 2 claws and remove the front seat cushion shield.


3. REMOVE FRONT INNER SEAT CUSHION SHIELD

  1. B165263
    Remove the screw.

  1. Disengage the 2 claws and remove the front inner seat cushion shield.


4. REMOVE FRONT SEAT INNER BELT ASSEMBLY

  1. B152832
    for LHD:

    1. Disengage the 2 hooks.

    2. B151307E02
      Disconnect the connectors and disengage 2 clamps.

    3. B147689
      Remove the nut and front seat inner belt assembly.

  1. for RHD:

    1. Disengage the 2 hooks.

    2. Disconnect the connectors and disengage 2 clamps.

    3. B236437
      Remove the nut and front seat inner belt assembly.


5. REMOVE FRONT SEAT CUSHION ASSEMBLY

  1. B149591E01
    Disengage the clamp.

  1. Disengage the hooks and remove the front seat cushion assembly.


6. REMOVE FRONT SEPARATE TYPE SEAT CUSHION COVER

  1. B148943E01
    Remove the 16 hog rings and front separate type seat cushion cover.


7. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY

  1. B134682E01
    Remove the 2 screws.

  1. Disconnect the 14 clamps and front separate type seatback cover.

  1. Pull the seatback board in the direction indicated by the arrow in the illustration to detach the 2 claws. Then, remove the front seatback board sub-assembly.


8. REMOVE FRONT SEAT HEADREST SUPPORT

  1. B134683
    Detach the 2 claws and remove the headrest support.

    HINT:
    Use the same procedure for the RH side and LH side.


9. REMOVE FRONT SEATBACK ASSEMBLY

  1. B149564
    Disengage the 3 hooks.

  1. B139110E01
    Remove the 2 hog rings.

  1. Remove the front seatback assembly.


10. REMOVE FRONT SEPARATE TYPE SEATBACK COVER

  1. B139112E01
    Remove the 10 hog rings and front separate type seatback cover.


11. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER LH

  1. B148653
    Remove the screw.

  1. Disengage the claw and remove the reclining adjuster inside cover LH.


12. REMOVE LOWER RECLINING ADJUSTER INSIDE COVER RH

  1. B148652
    Disconnect the clamp.

  1. Remove the screw.

  1. Disengage the claw and remove the reclining adjuster inside cover RH.


13. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER LH

  1. B148654
    Remove the screw and reclining adjuster inside cover LH.


14. REMOVE UPPER RECLINING ADJUSTER INSIDE COVER RH

  1. B148655
    Remove the screw and reclining adjuster inside cover LH.


15. REMOVE FRONT SEPARATE TYPE SEATBACK SPRING ASSEMBLY

  1. B148636
    Remove the 4 bolts and front separate type seatback spring assembly.

← DISASSEMBLY (Oct 2006 – May 2009)REASSEMBLY (Oct 2006 – May 2009) →