SYSTEM DESCRIPTION
Troubleshooting · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009
| Driver seat belt warning light |
When the driver seat belt is not fastened with the ignition switch on (IG), the driver seat belt warning light on the combination meter assembly comes on to inform the driver. The center airbag assembly detects the driver seat belt condition and sends signals to the body ECU and the combination meter assembly via CAN communication.
| Passenger seat belt warning (for LHD) |
When the passenger seat belt is not fastened with the ignition switch on (IG) and the passenger seat occupied, check that the passenger seat belt warning light on the clock display blinks. The occupant detection sensor detects if the passenger seat is occupied and sends signals to the combination meter assembly. The inner belt detects the passenger seat belt condition and sends signals to the combination meter assembly. After receiving the signals from the occupant detection sensor and inner belt, the combination meter assembly sends signals to the clock assembly to request the passenger seat belt warning light to blink or go off.
| Passenger seat belt warning (for 2GR-FE RHD) |
When the passenger seat belt is not fastened with the ignition switch on (IG) and the passenger seat occupied, check that the driver seat belt warning light on the combination meter assembly blinks. The occupant detection sensor detects if the passenger seat is occupied and sends signals to the combination meter assembly. The inner belt detects the passenger seat belt condition and sends signals to the combination meter assembly. If receiving the signals from the occupant detection sensor and inner belt, the driver seat belt warning light blinks or goes off.
- HINT:
- The driver seat belt warning light and passenger seat belt warning light are the same indicator light.