2006-2011 Camry Aurion · Service Manual RESTRAINTS

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Oct 2006 – May 2009

Versions by build date: Jun 2006 – Sep 2006 Oct 2006 – May 2009 from Jun 2009


Driver seat belt warning light
  1. When the driver seat belt is not fastened with the ignition switch on (IG), the driver seat belt warning light on the combination meter assembly comes on to inform the driver. The center airbag assembly detects the driver seat belt condition and sends signals to the body ECU and the meter assembly via CAN communication.


Passenger seat belt warning (only G.C.C. countries)
  1. When the passenger seat belt is not fastened with the ignition switch on (IG) and the passenger seat occupied, check that the passenger seat belt warning light on the clock display blinks. The occupant detection sensor detects if the passenger seat is occupied and sends signals to the meter assembly. The inner belt detects the passenger seat belt condition and sends signals to the meter assembly. After receiving the signals from the occupant detection sensor and inner belt, the meter assembly sends signals to the clock assembly to request the passenger seat belt warning light to blink or go off.

← SYSTEM DESCRIPTION (Jun 2006 – Sep 2006)SYSTEM DESCRIPTION (from Jun 2009) →