2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jun 2009


1. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER

  1. E134863E03
    Install the No. 2 ultrasonic sensor retainer to the rear bumper.
    Text in Illustration 
    *1
    Snap
    *2
    Keyhole

    NOTICE:
    Do not damage the bumper with the snap when installing the retainer.

    HINT:
    When installing the retainer, align the keyhole and snap as shown in the illustration.


2. INSTALL NO. 2 ULTRASONIC SENSOR

  1. E205958
    Engage the 2 claws and install the No. 2 ultrasonic sensor.

  1. Connect each sensor connector.

  1. E205959
    Install the sensor retainer as shown in the illustration.


3. INSTALL REAR BUMPER ASSEMBLY (w/o Rear Lower Spoiler)

  1. B137214
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws and 2 clips.

  1. B137213
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


4. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY LH (w/o Rear Lower Spoiler)

  1. B137209
    Install the rear quarter panel mudguard sub-assembly LH with the 3 screws.


5. INSTALL REAR QUARTER PANEL MUDGUARD SUB-ASSEMBLY RH (w/o Rear Lower Spoiler)

HINT:
Use the same procedure for the RH side and LH side.


6. INSTALL REAR BUMPER ASSEMBLY (w/ Rear Lower Spoiler)

  1. B140154
    Engage each claw.

  1. Install the rear bumper assembly with the 6 screws.

  1. B147905
    Install the 2 rear bumper plates.

  1. w/ Clearance Sonar System:

    1. B149446
      Install the grommet

    2. Connect the connector.


7. INSTALL REAR FLOOR BOARD (w/ Rear Lower Spoiler)

  1. B138885E01
    Install the rear floor board with the 3 nuts, 2 clips and 4 screws.


8. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH

  1. B136855
    Install the luggage compartment inner trim cover RH with the 2 clips.


9. INSTALL REAR FLOOR FINISH PLATE

  1. B136852
    Engage the 7 clips and install the rear floor finish plate.


10. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

  1. B136879
    Install the 2 No. 1 luggage compartment trim hooks with the 2 screws.


11. INSTALL SPARE WHEEL COVER ASSEMBLY

12. INSTALL SPARE WHEEL COVER CLAMP

13. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
← REMOVAL (from Jun 2009)COMPONENTS (from Oct 2006) →