2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Oct 2006


INSPECT CLEARANCE WARNING BUZZER

  1. B139281E01
    Apply battery voltage and check operation of the warning buzzer, as shown in the table below.

    Result:
    Measurement Condition
    Specified Condition
    Battery voltage (+) → 1
    Battery voltage (-) → 2
    Operating sound occurs

    If the result is not as specified, replace the clearance warning buzzer.

    HINT:
    The clearance warning buzzer does not sound without battery voltage applied because the buzzer is a separately-excited type.

← REMOVAL (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →