REMOVAL
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
|
 |
- Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
| 2.
REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Disengage the 2 clips and remove the No. 2 instrument cluster finish panel garnish.
| 3.
REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
 |
- Disengage the 2 clips and remove the No. 1 instrument cluster finish panel garnish.
| 4.
REMOVE POSITION INDICATOR HOUSING ASSEMBLY
|
 |
- Disengage the 6 claws and the 3 clips, and then remove the position indicator housing assembly.
| 5.
REMOVE UPPER CONSOLE REAR PANEL SUB-ASSEMBLY
|
 |
- Disengage the 3 claws and the 5 clips.
Disconnect the connector and remove the upper console rear panel sub-assembly.
| 6.
REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
- Remove the 2 screws <F>.
Disengage the 4 claws.
Disconnect each connector and remove the upper console panel sub-assembly.
- HINT:
- Set the shift lever in the D position.
| 7.
REMOVE CLEARANCE WARNING BUZZER |
 |
- Disconnect the connector.
Disengage the clamp and remove the clearance warning buzzer.