REASSEMBLY
Removal / installation · Vehicles built Jun 2006 – May 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| 1.
INSTALL REAR LIGHT GASKET |
 |
- Install a new rear light gasket.
- NOTICE:
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.
| 2.
INSTALL TAIL LIGHT BULB |
 |
Install the tail light bulb to the rear light socket and wire.
- Turn the tail light bulb and rear light socket and wire in the direction indicated by the arrow and install them as a unit.
| 3.
INSTALL BACK UP LIGHT BULB |
 |
Install the back up light bulb to the rear light socket and wire.
- Turn the back up light bulb and rear light socket and wire in the direction indicated by the arrow and install them as a unit.
| 4.
INSTALL REAR BUMPER RETAINER UPPER |
 |
- Engage the claw and install the rear bumper retainer upper.
| 5.
INSTALL REAR TURN SIGNAL LIGHT BULB |
 |
Install the rear turn signal light bulb to the rear turn signal light socket.
- Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow and install them as a unit.
| 6.
INSTALL TAIL AND STOP LIGHT BULB |
 |
Install the tail and stop light bulb to the tail and stop light socket.
- Turn the tail and stop light bulb and tail and stop light socket in the direction indicated by the arrow and install them as a unit.
| 7.
INSTALL REAR COMBINATION LIGHT GASKET |
 |
- Install a new rear combination light gasket.
- NOTICE:
- Be sure to remove all traces of the old gasket from the body.
- Do not reuse the removed gasket. Be sure to install a new rear combination light gasket to prevent water ingress.