2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jun 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


1. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb to the rear light socket and wire.

  1. E192208
    Turn the back up light bulb and the rear light socket and wire in the direction indicated by the arrow shown in the illustration and install them as a unit.


2. INSTALL REAR LIGHT GASKET

  1. E192206
    Install a new rear light gasket.


3. INSTALL REAR BUMPER RETAINER UPPER

  1. E192204
    Engage the claw and install the rear bumper retainer upper.


4. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear turn signal light socket.

  1. E192203
    Turn the rear turn signal light bulb and rear turn signal light socket in the direction indicated by the arrow shown in the illustration and install them as a unit.


5. INSTALL REAR COMBINATION LIGHT GASKET

  1. E192201
    Install a new rear combination light gasket.

← REASSEMBLY (Jun 2006 – May 2009)INSTALLATION (Jun 2006 – May 2009) →