2006-2011 Camry Aurion · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE REPAIR SERVICE STARTER KIT

  1. A079718E05
    Remove the nut and disconnect the lead wire from terminal C.

  1. A079719E05
    Remove the 2 screws that hold the magnetic switch to the motor terminal starter kit.

  1. Remove the repair service starter kit.

  1. Remove the return spring and the plunger from the repair service starter kit.


2. REMOVE STARTER YOKE ASSEMBLY

  1. A079720E05
    Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.

  1. A079721E03
    Remove the starter yoke assembly from the starter commutator end frame assembly.


3. REMOVE STARTER ARMATURE PLATE

  1. A079722E04
    Remove the starter armature plate from the starter yoke assembly.


4. REMOVE STARTER COMMUTATOR END FRAME COVER

  1. A079723E03
    Using a screwdriver, remove the starter commutator end frame cover.


5. REMOVE STARTER ARMATURE ASSEMBLY

  1. A082440E07
    Using snap ring pliers, remove the snap ring and plate washer.

  1. Remove the starter armature assembly from the commutator end frame assembly.

    NOTICE:
    Do not drop the starter armature assembly.


6. REMOVE PLANETARY GEAR

  1. A081167E03
    Remove the 3 planetary gears from the motor terminal starter kit.

← REMOVAL (from Jun 2009)DISASSEMBLY (from Jun 2009) →