2006-2011 Camry Aurion · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built Oct 2006 – May 2009

Versions by build date: Oct 2006 – May 2009 from Jun 2009


1. REMOVE ENGINE UNDER COVER LH

2. REMOVE ENGINE UNDER COVER RH

3. DRAIN AUTOMATIC TRANSAXLE FLUID

  1. C142572
    Remove the refill plug and gasket.

  1. C142571
    Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket.

  1. C142574
    Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube.

  1. Drain the automatic transaxle fluid.

  1. C142574
    Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube.

    Torque:
    1.7 N*m{ 17 kgf*cm , 15 in.*lbf }

  1. C142571
    Using a 6 mm socket hexagon wrench, install the overflow plug with a new gasket.

    Torque:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }

  1. C142572
    Install the refill plug with a new gasket.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }


4. REMOVE AIR COOLED OIL COOLER

  1. C153486
    Disconnect the 2 oil cooler hoses.

  1. Remove the bolt, 2 nuts, and the air cooled oil cooler.

← COMPONENTS (from Oct 2006)REMOVAL (from Jun 2009) →