2006-2011 Camry Aurion · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built from Oct 2006

HINT:
When installing the name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body and name plate excessively.


1. INSTALL LUGGAGE COMPARTMENT DOOR EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the emblem. (If reusing the emblem)

    1. Using a heat light, heat the emblem.

    2. Remove the double-sided tape from the emblem.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the emblem.

  1. Install the emblem.

    1. Using a heat light, heat the vehicle body and emblem.

    2. Remove the release paper from the emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the emblem.

      B149527E01


2. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the plate. (If reusing the plate)

    1. Using a heat light, heat the plate.

    2. Remove the double-sided tape from the plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the plate.

  1. Install the plate.

    1. Using a heat light, heat the vehicle body and plate.

    2. Remove the release paper from the plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the plate.

      B158715E01

      Reference measurement:
      Area
      Measurement
      A
      49.4 mm (1.945 in.)
      B
      50.0 mm (1.969 in.)
      C
      65.2 mm (2.567 in.)
      D
      195.4 mm (7.693 in.)


3. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the name plate. (If reusing the name plate)

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.

  1. Install the name plate.

    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.
      for AT-X plate:

      B158708E01

      Reference measurement:
      Area
      Measurement
      A
      53.1 mm (2.091 in.)
      B
      53.5 mm (2.106 in.)
      C
      61.9 mm (2.437 in.)
      D
      135.1 mm (5.319 in.)

      for PRODIGY plate:

      B158709E01

      Reference measurement:
      Area
      Measurement
      A
      37.5 mm (1.476 in.)
      B
      49.8 mm (1.961 in.)
      C
      62.7 mm (2.469 in.)
      D
      201.2 mm (7.921 in.)

      for PRESARA plate:

      B158710E01

      Reference measurement:
      Area
      Measurement
      A
      35.9 mm (1.413 in.)
      B
      50.1 mm (1.972 in.)
      C
      60.8 mm (2.394 in.)
      D
      209.6 mm (8.252 in.)

      for Sportivo SX6 plate:

      B158711E01

      Reference measurement:
      Area
      Measurement
      A
      37.9 mm (1.492 in.)
      B
      50.3 mm (1.980 in.)
      C
      45.2 mm (1.780 in.)
      D
      65.9 mm (2.594 in.)
      E
      86.5 mm (3.406 in.)
      F
      127.7 mm (5.028 in.)
      G
      227.2 mm (8.945 in.)
      H
      63.5 mm (2.500 in.)

      for Sportivo ZR6 plate:

      B158712E01

      Reference measurement:
      Area
      Measurement
      A
      37.9 mm (1.492 in.)
      B
      50.3 mm (1.980 in.)
      C
      45.2 mm (1.780 in.)
      D
      65.9 mm (2.594 in.)
      E
      86.5 mm (3.406 in.)
      F
      142.1 mm (5.595 in.)
      G
      227.2 mm (8.945 in.)
      H
      63.6 mm (2.504 in.)

      for TOURING plate:

      B158713E01

      Reference measurement:
      Area
      Measurement
      A
      35.7 mm (1.406 in.)
      B
      50.2 mm (1.976 in.)
      C
      61.0 mm (2.402 in.)
      D
      196.1 mm (7.720 in.)

      for GRANDE plate:

      B158714E01

      Reference measurement:
      Area
      Measurement
      A
      35.6 mm (1.402 in.)
      B
      50.2 mm (1.976 in.)
      C
      60.7 mm (2.390 in.)
      D
      189.7 mm (7.469 in.)


4. INSTALL FRONT FENDER PLATE LH
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the plate. (If reusing the name plate)

    1. Using a heat light, heat the plate.

    2. Remove the double-sided tape from the plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the plate.

  1. Install the plate.

    1. Using a heat light, heat the vehicle body and plate.

    2. Remove the release paper from the plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the plate.

      B164130E01

      Reference measurement:
      Area
      Measurement
      A
      170.5 mm (6.713 in.)
      B
      172.5 mm (6.791 in.)
      C
      111.7 mm (4.398 in.)
      D
      171.7 mm (6.760 in.)


5. INSTALL FRONT FENDER PLATE RH
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the plate. (If reusing the name plate)

    1. Using a heat light, heat the plate.

    2. Remove the double-sided tape from the plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the plate.

  1. Install the plate.

    1. Using a heat light, heat the vehicle body and plate.

    2. Remove the release paper from the plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the plate.

      B164131E01

      Reference measurement:
      Area
      Measurement
      A
      170.5 mm (6.713 in.)
      B
      172.5 mm (6.791 in.)
      C
      111.7 mm (4.398 in.)
      D
      171.7 mm (6.760 in.)


6. INSTALL FRONT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Clean the name plate. (If reusing the name plate)

    1. Using a heat light, heat the name plate.

    2. Remove the double-sided tape from the name plate.

    3. Wipe off any tape adhesive residue with cleaner.

    4. Apply new double-sided tape to the name plate.

  1. Install the name plate.

    1. Using a heat light, heat the vehicle body and name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.

    3. Install the name plate.
      for AURION plate LH side:

      B158716E01

      Reference measurement:
      Area
      Measurement
      A
      228.1 mm (8.980 in.)
      B
      233.6 mm (9.197 in.)
      C
      68.1mm (2.681 in.)
      D
      298.7 mm (11.760 in.)

      for AURION plate RH side:

      B158717E01

      Reference measurement:
      Area
      Measurement
      A
      228.1 mm (8.980 in.)
      B
      233.6 mm (9.197 in.)
      C
      68.1 mm (2.681 in.)
      D
      298.7 mm (11.760 in.)

← REMOVAL (from Oct 2006)COMPONENTS (from Jun 2006) →