2006-2011 Camry Aurion · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Oct 2006

HINT:
When removing the name plate, heat the vehicle body and name plate using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body and name plate excessively.


1. REMOVE LUGGAGE COMPARTMENT DOOR EMBLEM

  1. B149523E01
    Put protective tape around the emblem.

  1. Insert a piano wire between the vehicle body and emblem.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the emblem to the vehicle body.

    NOTICE:
    1. If reusing the emblem, take care not to damage the emblem or cut the location pins.
    2. Be careful not to damage the vehicle body.

  1. Remove the emblem.


2. REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE

  1. B149548E01
    Put protective tape around the name plate.

  1. Insert a piano wire between the vehicle body and name plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the name plate to the vehicle body.

    NOTICE:
    1. If reusing the name plate, take care not to damage the name plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the name plate.


3. REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR PLATE

  1. B149547E01
    Put protective tape around the plate.

  1. Insert a piano wire between the vehicle body and plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.

    NOTICE:
    1. If reusing the plate, take care not to damage the plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the plate.


4. REMOVE FRONT FENDER PLATE LH

  1. B149524E01
    Put protective tape around the plate.

  1. Insert a piano wire between the vehicle body and plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.

    NOTICE:
    1. If reusing the plate, take care not to damage the plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the plate.


5. REMOVE FRONT FENDER PLATE RH

  1. B165378E01
    Put protective tape around the plate.

  1. Insert a piano wire between the vehicle body and plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.

    NOTICE:
    1. If reusing the plate, take care not to damage the plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the plate.


6. REMOVE FRONT DOOR NAME PLATE

  1. B158707E01
    Put protective tape around the plate.

  1. Insert a piano wire between the vehicle body and plate.

  1. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.

  1. Pull the piano wire and scrape off the double-sided tape that holds the plate to the vehicle body.

    NOTICE:
    1. If reusing the plate, take care not to damage the plate.
    2. Be careful not to damage the vehicle body.

  1. Remove the plate.

← COMPONENTS (from Oct 2006)INSTALLATION (from Oct 2006) →