REMOVAL
Removal / installation · Vehicles built from Jun 2006
| 1.
REMOVE TAIL PIPE ASSEMBLY |
 |
Remove the 2 nuts and tail pipe assembly.


Remove the gasket from the center exhaust pipe.
| 2.
REMOVE CENTER EXHAUST PIPE ASSEMBLY |
 |
Remove the 2 bolts, 2 nuts and center exhaust pipe assembly.


Remove the gasket from the front exhaust pipe.
| 3.
REMOVE HEATED OXYGEN SENSOR
|
 |
- Disconnect the heated oxygen sensor connector.
- Using SST, remove the heated oxygen sensor from the front No. 3 exhaust pipe assembly.
- SST
- 09224-00010
- NOTICE:
- Do not damage the heated oxygen sensor.
| 4.
REMOVE FRONT EXHAUST PIPE ASSEMBLY |
 |
Remove the 4 nuts, front exhaust pipe No. 1 support bracket and front exhaust pipe assembly.


Remove the gasket from the front exhaust pipe.
| 5.
REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET |
 |
- Remove the 2 bolts and rear support bracket.