HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Oct 2006 – May 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
- HINT:
- Use this procedure to troubleshoot the power mirror control system.
- The intelligent tester should be used in steps 3 and 5.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| NEXT |
|
 |
|
|
| 2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK |
| NEXT |
|
 |
|
|
| 3.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM (CAN) |
- HINT:
- for LHD: Click here
- for RHD: Click here
Use the intelligent tester to check for normal function of the CAN communication system.
(ECU unconnected, communication line malfunctioning) If no codes are output, proceed to A.
(ECU unconnected, communication line malfunctioning) If any codes are output, proceed to B.
|
B.
|
 |
|
|
| A |
|
 |
|
|
- HINT:
-
Click here
| NEXT |
|
 |
|
|
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING |
Data list/Active test
- HINT:
-
Click here
Circuit inspection
Terminals of ECU
- HINT:
-
Click here
| NEXT |
|
 |
|
|
| 6.ADJUST, REPAIR OR REPLACE |
| NEXT |
|
 |
|
|