2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection · Vehicles built Jun 2006 – May 2009

Versions by build date: Jun 2006 – May 2009 from Jun 2009


INSPECT FRONT NO. 1 SPEAKER

HINT:
Remove interior parts so that the front No. 1 speaker can be seen.

  1. Check the speaker installation.

    OK:
    The speaker is securely installed.

    If the result is not as specified, reinstall the front No. 1 speaker.

  1. Visually check the speaker.

    OK:
    The cone paper of the speaker is not torn.

    If the result is not as specified, replace the front No. 1 speaker.

  1. Speaker resistance check

    1. Disconnect the front No. 1 speaker connector.

    2. Measure the resistance between the terminals of the speaker.

      Standard resistance:
      Approximately 4 Ω

      If the result is not as specified, replace the front No. 1 speaker.


INSPECT FRONT NO. 2 SPEAKER (for 6 Speaker System)

HINT:
Remove interior parts so that the front No. 2 speaker can be seen.

  1. Check the speaker installation.

    OK:
    The speaker is securely installed.

    If the result is not as specified, reinstall the front No. 2 speaker.

  1. Visually check the speaker.

    OK:
    The cone paper of the speaker is not torn.

    If the result is not as specified, replace the front No. 2 speaker.

← COMPONENTS (from Oct 2006)ON-VEHICLE INSPECTION (from Jun 2009) →