ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2009
Versions by build date: Jun 2006 – May 2009 from Jun 2009
| INSPECT FRONT NO.1 SPEAKER |
With the speaker installed, check that there is no looseness or other abnormalities.
Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.
Measure the resistance of the speaker.

- Standard Resistance:
w/ Stereo Component Amplifier: Tester Connection
Condition
Specified Condition
1 - 2
Always
1.6 to 2.4 Ω
w/o Stereo Component Amplifier: Tester Connection
Condition
Specified Condition
1 - 2
Always
3.2 to 4.8 Ω
Text in Illustration *1
Component without harness connected
(Front No. 1 Speaker)
| INSPECT FRONT NO.2 SPEAKER |
With the speaker installed, check that there is no looseness or other abnormalities.
Check that there is no foreign matter in the speaker, no tears on the speaker's cone part or other abnormalities.
When there is a possibility that either the right or left speaker is malfunctioning, interchange the speakers and perform an inspection. If the malfunction disappears after interchanging the speakers, replace the malfunctioning speaker.
- HINT:
- Connect all connectors to the speakers when performing an inspection. If the result is not as specified, replace the speaker assembly.
