2006-2011 Camry Aurion · Service Manual BODY ELECTRICAL

Black Screen

Circuit diagnosis · Vehicles built from Jun 2009

INSPECTION PROCEDURE


1. CHECK DISPLAY SETTING
  1. Enter the display quality adjustment screen.

  1. Check that the display is not in "Screen OFF" mode.

    OK:
    The display setting is not in "Screen OFF" mode.



NG
CHANGE SCREEN TO "Screen ON" MODE
OK


2. CHECK IMAGE QUALITY SETTING
  1. Check that the screen color quality can be set.

    OK:
    Setting is possible.



NG
Go to step 3
OK

SET SCREEN COLOR QUALITY TO NORMAL

3. CHECK CABIN
  1. Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

    HINT:
    1. A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.
    2. The appropriate cabin temperature is 20 to 30°C (68 to 86°F).

    OK:
    Condensation is not likely to occur and temperature is not high or extremely low.



NG
SET CABIN TO APPROPRIATE TEMPERATURE
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← USB Audio System Recognition/Play Error (from Jun 2009)Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter (from Jun 2009) →