Release the vacuum from the booster by depressing the brake pedal several times. Then remove the brake master cylinder sub-assembly from the brake booster assembly.
The structure of the master cylinder allows the piston to pop out, so observe the following:
The master cylinder requires careful handling. Do not allow the master cylinder to receive any impact, such as from being dropped. Do not reuse a master cylinder that has been dropped.
Do not scratch or damage the circumference of the piston. For the seal to function correctly, all sliding surfaces must not have any damage.
Do not pull out the master cylinder piston.
When installing the master cylinder, remove the protectors for the piston and the discharge port.
Apply the supplied grease to the outer diameter of the piston and the inner diameter of the brake booster.
1.
DRAIN BRAKE FLUID
NOTICE:
If the brake fluid leaks onto any painted surface, wash off and remove the brake fluid completely.