DISASSEMBLY
Removal / installation · Vehicles built from Jun 2009
Versions by build date: Oct 2006 – May 2009 from Jun 2009
| 1.
REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
 |
- Using a screwdriver, pull up the parking brake pedal claw.
- Remove the lock nut and the No. 1 wire adjusting nut.
- Using needle-nose pliers, remove the clip and the No. 1 parking brake cable from the parking brake pedal assembly.
| 2.
REMOVE PARKING BRAKE SWITCH ASSEMBLY |
 |
- Remove the screw and the parking brake switch assembly.
- HINT:
- For inspection of the parking brake switch assembly, Click here.
| 3.
REMOVE PARKING PEDAL PAD |
 |
- Remove the parking pedal pad.