REASSEMBLY
Removal / installation · Vehicles built from Oct 2006
| 1.
INSTALL PARKING PEDAL PAD |
 |
- Install the parking pedal pad to the parking brake pedal assembly.
| 2.
INSTALL PARKING BRAKE SWITCH ASSEMBLY |
 |
- Install the parking brake switch assembly with the screw.
| 3.
INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY |
 |
- Pass the No. 1 parking brake cable assembly through the pedal guide.
Using a brass bar and a hammer, install the clip to the No. 1 parking brake cable assembly.
- Temporarily tighten the lock nut and the No. 1 wire adjusting nut.
- NOTICE:
- Fully tighten the lock nut and the No. 1 wire adjusting nut when adjusting the parking brake pedal travel.
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
- Bend the parking brake pedal claw.