2006-2011 Camry Aurion · Service Manual BRAKE

REASSEMBLY

Removal / installation · Vehicles built from Oct 2006


1. INSTALL PARKING PEDAL PAD

  1. C132702
    Install the parking pedal pad to the parking brake pedal assembly.


2. INSTALL PARKING BRAKE SWITCH ASSEMBLY

  1. C132700
    Install the parking brake switch assembly with the screw.


3. INSTALL NO. 1 PARKING BRAKE CABLE ASSEMBLY

  1. C143747E01
    Pass the No. 1 parking brake cable assembly through the pedal guide.

  1. Using a brass bar and a hammer, install the clip to the No. 1 parking brake cable assembly.

  1. C132697
    Temporarily tighten the lock nut and the No. 1 wire adjusting nut.

    NOTICE:
    Fully tighten the lock nut and the No. 1 wire adjusting nut when adjusting the parking brake pedal travel.

    Torque:
    5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

  1. C132699
    Bend the parking brake pedal claw.

← DISASSEMBLY (from Jun 2009)INSTALLATION (Oct 2006 – May 2009) →